MOTIP DPF Cleaner in 500ml Aerosol
MOTIP DPF Cleaner in 500ml Aerosol to loosen and remove ash deposits in diesel-particle filter systems. to loosen and remove ash deposits in diesel-particle filter systems.
DPF Cleaner is fast-acting and non-corrosive. MOTIP DPF Cleaner is free from solvents and non-flammable.
Tool to loosen and remove ash deposits in diesel-particle filter systems, without disassembly. Applications Desel-particle filter systems
Free from solvents
Contents : 500 ml
Basis : Solution of specific tensides
Propellant : Inert propellant
VOC-content : 0% w/w
Relative density at 20¬∞C : 0,99 g/ml
Vapour pressure at 20¬∞C : 7 -to 9 bar
Before use, carefully read the instructions on the packaging and act accordingly.
For professional use only The aerosol should have room temperature.
Best processing temperature 5 to 30¬∞C.
Before use, shake the aerosol.
Before use, allow the engine to cool down (maximum 50¬∞C).
Observe the instructions of the car manufacturer.
Disassemble temperature or pressure sensor from the filter.
Insert the special tube into the opening.
Empty the can in the following intervals: spray 3 - 5 times; allow to soak for 5 seconds.
Install temperature or pressure sensor.
Start the engine and allow to run stationary for at least 15 minutes to evaporate most of the fluid.
Make a test-drive of 30 minutes.
This may cause the formation of steam.
PLEASE EMAIL FOR ANY INFORMATION