BRAND NEW PARTSMOTIP DPF Cleaner in 500ml Aerosol MOTIP DPF Cleaner in 500ml Aerosol to loosen and remove ash deposits in diesel-particle filter systems. to loosen and remove ash deposits in diesel-particle filter systems. DPF Cleaner is fast-acting and non-corrosive. MOTIP DPF Cleaner is free from solvents and non-flammable.Tool to loosen and remove ash deposits in diesel-particle filter systems, without disassembly. Applications Desel-particle filter systemsProduct characteristicsFast-actingFree from solventsNon-corrosiveNon-flammableChemical CharacteristicsContents : 500 mlBasis : Solution of specific tensidesPropellant : Inert propellantVOC-content : 0% w/wRelative density at 20°C : 0,99 g/mlVapour pressure at 20°C : 7 -to 9 barUsageBefore use, carefully read the instructions on the packaging and act accordingly.For professional use only The aerosol should have room temperature.Best processing temperature 5 to 30°C.Before use, shake the aerosol.Before use, allow the engine to cool down (maximum 50°C).Observe the instructions of the car manufacturer.Disassemble temperature or pressure sensor from the filter.Insert the special tube into the opening.Empty the can in the following intervals: spray 3 - 5 times; allow to soak for 5 seconds.Install temperature or pressure sensor.Start the engine and allow to run stationary for at least 15 minutes to evaporate most of the fluid.Make a test-drive of 30 minutes.This may cause the formation of steam.PLEASE EMAIL FOR ANY INFORMATION